Oil Leak Fix Tips – How to Fix an Oil Leak


It is usual for us to see a line of oil on the road, but if we think precisely, it can be a strong reason of big mishaps or accidents. You must know that this oil leakage can be harmful for your car engine and it may, at the same time demand lots of money from you to get rid of it.

Another thing to keep in mind is that oil is extremely flammable and can go on fire when exposed to an ignition origin. So, you must know how to fix an oil leak to avoid dangers and risks at all. Let us talk about some ways that enable you to throw away this problem.

Oil Leak

Tools

There are some tools you may need to tackle this difficulty.

  • Jack, lofty ramp, or platform
  • Dolly
  • Flashlight
  • Socket wrench or else adjustable wrench
  • Silicone sealant
  • Fresh valve cover gasket
  • New oil pan gasket
  • Degreaser
  • Oil

Steps:

Checking for Leaks:

  • First thing you have to do it is to park the car on a level plane and turn the engine off.  Wait for the engine to cool totally ahead of popping open the hood.
  • Hold the car up on a jack, otherwise on a ramp or you may use an elevated surface as well.
  • Pop open the hood, and look over the engine block as well as oil pipelines for any signs of leaks.  You can by far spot a leak if the part has a smattering of wet oil around it.  Leaks are most probable to be spotted on the valve cover.
  • If you find the oil leak in the pipelines, at that time you can for the time being fix it with some heat resistant silicone.  But, if the oil leak is in the engine block itself, in this case you require having the complete engine block replaced.
  • Test out under the car to make out if there are leaks or cracks on the oil pan or else the oil pan gasket.
  • Drain all the oil from the car if you have to to make repairs.

Replacing the Valve Cover Gasket:

Nearly all oil leaks take place on the valve cover gasket.  Heat spoil and mechanical pressure from a running engine can a cause to cut down the lifetime of the factory installed gasket.  To fix the oil leak, you have to replace the gasket with a fresh gasket.

For this course, follow the given steps:

  • Take out the spark plugs and breather hoses from the valve cover.
  • Loosen the bolts grasping the valve cover in place. You are advised to avoiding losing the nuts and bolts.
  • Now, pry off the valve cover from the engine block vigilantly.  Make certain that pieces of the gasket material don’t get stuck on the engine block.  It usually takes a while to take away the gasket pieces with a razor blade.
  • You have to now clean the rim of the valve cover totally to permit the innovative gasket to stick.
  • Earlier than sticking in the new gasket, prime the rim with a layer of high temperature silicone sealant, and then apply the new gasket to the rim.
  • Protect the valve cover to the engine block and do away with oil and grease from the engine block with an engine degreaser.

Oil Leak

Replacing the Oil Pan Gasket:

You may know that oil leaks use to happen from under the car the same as the oil drains.  The seal among the oil pan and the oil line can go down from heat pressure and age.  Now, let us talk about how you can replace the present oil pan gasket with a new one:

  • First, test out the oil pan for any holes or cracks.  It is best to put back the oil pan with a new one if it is badly damaged, other than you can patch up minor leaks with silicone.
  • Now, loosen the bolts holding the oil pan and softly pry it straight down.  Avoid tilting the pan, as you don not wish for the oil to go into your eyes.
  • Now, clean the oil pan by taking out all the gasket material stuck to the rim with the help of a razor blade or else a non-serrated knife.
  • Prime the rim of the oil pan by applying a slight layer of heat resistant silicone on the inside plane, and apply the new gasket.  Prop the oil pan back into the frame.
  • At the moment, you are supposed to top up your car with oil, and taking a test drive to ensure for leaks.

If you correctly follow the given tips and steps, it will not only save your money but also bring you out from future risks and threats.

Further Readings:

Share and Enjoy:
  • Print this article!
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • Propeller
  • Reddit
  • StumbleUpon
  • Twitter
  • E-mail this story to a friend!
  • Fark
  • Furl
  • Live
  • Slashdot
  • SphereIt
  • Technorati

Related posts:

  1. Big Block Chevy Manifold Installation Tips
  2. Why Is My Car Leaking Antifreeze?
  3. Why Is My Car Leaking Antifreeze?
  4. How to Change a Head Gasket on a Honda Civic
  5. Replacing the EGR Valve

Filed Under: Car Tuning

Tags:

RSSComments (0)

Trackback URL

Leave a Reply

You must be logged in to post a comment.